Break Down of Hose & Fitting Types Motamec Hose and Fitting Types: 1). 200 Series - Soft Rubber Inner & Stainless Steel Outer Hose for Fuel, Oil & Water
Read MoreMotamec Hose & Fittings Technical Guide
03/08/2015 10:53
Rally Brake Hose Setup Hydraulic Handbrake
25/06/2015 16:01
How To Assemble AN/JIC Fittings - Oil Hose
19/06/2015 15:50
In this 'how to' we will show you how to put together some PTFE Teflon hose and fittings. For this example we are going to make a hose for a brake fluid reservoir to a master cylinder using -4 AN/JIC stainless steel braided hose and fittings. But these same methods can be used for other fittings and hose of the same type.
Read MoreHow To Assemble PTFE Brake & Fuel Hoses
18/06/2015 10:17
In this 'how to' we will show you how to put together some PTFE Teflon hose and fittings. For this example we are going to make a hose for a brake fluid reservoir to a master cylinder using -4 AN/JIC stainless steel braided hose and fittings. But these same methods can be used for other fittings and hose of the same type.
Read MoreHow To Use Laser Tracking Gauges
16/06/2015 15:14
How to use the Motamec laser tracking gauges & assembly instructions. Assembly, Preparation, Calibration & Operation
Read MoreWhat Brake Fluid?
29/01/2015 11:02
I came to work this morning knowing I needed brake fluid. I was going to order some DOT5, simple! The higher the DOT number the better right? Well if you look at this table of DOT brake fluid standards you'd be forgiven for thinking the same:
Read More