Coronavirus (COVID-19) Update – We are now processing and dispatching orders again on a daily basis. Due to reduced staff and restrictions that are in place in the UK and worldwide, there may be some delay in receiving your order. We will try our best to get your items sent as fast and safe as possible. If you have any questions please get in touch via email, thank you.

More Views

  • Motamec_punch_flare_tool.jpg
  • T2AJ4371-Edit.jpg
  • T2AJ4373.jpg
  • T2AJ4375.jpg
  • T2AJ4370-Edit.jpg
  • images_k_20851_6%20(1).jpg
  • T2AJ4369-Edit.jpg
  • Sheet-Metal-Hole-Flare-Swager-Dimple-_57.jpg

Motamec Hole Punch Cutter Flare Swage Tool 1.0'' Sheet Metal Alloy Plate Dimple

Excl. Tax: £49.58 Incl. Tax: £59.50

Availability:In stock


Motamec Hole Punch and Flare / Swage Hand Tool
Size: 1'' ID (25.4mm)
Punches hole and flares in sheet metal / aluminium in one action
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and flared.
Flared hole will have a 45 degree radius angle
Can also be used as regular hole punch by not using the flare forming ring.
Anti-friction thrust bearings included
For sheet metal & alloy plates
Extensively used in the aerospace and motorsport fabrication industries for lightening with increased panel strength and appearance
CNC Manufactured Steel Tool, heat treated for long life
1" is the inside diameter of the hole to be flared
Can also be used in a bench press for repetitive work
Please note: Pilot hole must be drilled first for the draw bolt

Recommended maximum material thickness:
Mild steel: 1.5mm
Stainless steel: 1.0mm
Aluminium: 2mm
Damage may occur if used on thicker material
Team Partners